STARLIGHT :
For Laser Tooth Whitening and Composite Restorations.
The
STARLIGHT s is an innovative and really interesting product, since it
makes use of luminous LEDs instead of the traditional halogen lamps.
It uses a high efficiency LED lodged at the top of the handpiece. This
innovative solution, as well as determining a considerable reduction of
the handpiece size, shows two important advantages:
- The lifespan of the light source (of about 1.800.000 cycles - 20
sec.).
- The elimination of the need to cool through forced ventilation.
The electronics necessary to the working of the Starlight s is
integrated inside the handpiece and it allows the application on the
dental chair unit with extreme easiness and a unique aesthetic result.
The Starlight s' emission of light is much more directed to the
composite's absorption spectrum than the one of the halogen lamps.
This allows excellent polymerization results with lower power and
without heat emission.
TECHNICAL CHARACTERISTICS
Power supply: 24 Vac +/- 10% - 50/60 Hz
Power supply:
33 Vdc +/- 10%
Light source: A 5 W high efficiency led with concentrating
optical device.
Wave lenght: Between 440 - 480 nm
Average lifespan: 1.800.000 cycles, 20 seconds each.
Exposure time: 20 seconds. Acoustic signal after 10 sec. and at
the end of the exposure cycle.
Possibility of stopping the cycle at any time.
Optical fibre: Ø 8 mm coherent drawn fibres superfused.
Sterilizable in autoclave (max.T.135 °C for 20 minutes - max 500 cycles)
Dimensions: L. 148 mm Ø 22 mm
Weight: 75 gr.
Mectron Medical
Equiments , Italy
COMPACT PIEZO
For
Periodontal Scaling.
"NEW DIGITAL ELECTRONICS"
Mectron Control Starlight System identifies automatically the type of
handpiece connected to the cord (scaler or Starlight p led
photopolymerizator ) and sets up suitable parameters of functioning.
Feedback System automatic and instantaneous power control in function of
the resistance encountered by the insert
Automatic Protection Control interrupts power and water supply in case
of incorrect use of the handpiece and insert tip.
TECHNICAL CHARACTERISTICS
Dimensions: 46 x 71 x 34 mm
Working frequency: 24.000-29.500 Hz
Power supply:
24 Vac +/-10% 50/60 Hz
32 Vdc +/-10%
Minimum supply power: 40 W
Water supply: Pressure 1-6 bar
Protections:
APC (automatic protection circuit) which eliminates all tension on the
handpiece and inhibits functioning of the water solenoid valve in the
following cases:
- Disconnection of handpiece triggering time APC 20ms
- Electrical damage of the handpiece cord triggering time APC 20ms
- Insert not tightened properly triggering time APC 80ms
Equipment: Alu-Box with new osseonitrated insert tips and
dynamometric wrench.
| ROOT ZX II :
Apex Locator with Low Speed Handpiece
FEATURES
Larger, easy to read screen
Shock-resistant design
Unmatched clinical accuracy
Ability to work in wet canals
Modified design delivers improved
stability
Self-calibrating; no buttons to push
Upgrade Option to Low Speed handpiece
Long File Holder
A long touch file holder has been designed to be used
with the probe cord. It features a fork-like tip that
allows the clinician to get an apex reading by simply
touching the file. The file holder is 5 inches long,
autoclave safe and ideal for hard-to-reach molar
procedures, thus increasing access to the work area.
|
Indications
Apex location/measurement of root canal length |
J. Morita USA, Inc.
9 Mason
Irvine, CA. 92618
|
|
|
